HOW TO CHOOSE EXCAVATOR ATTACHMENTS?

Excavators should not be used under any circumstances for the lifting of persons as they are primarily designed for excavating with a bucket and consequently are capable of operating speeds and movements which make them totally unsuitable for the lifting of persons.

 

Access to height on construction sites should be by machines designed for the purpose of lifting persons such as MEWPs, mast climbing work platforms, suspended access platforms or passenger/goods hoists, or by the use of scaffolds.

 

In special cases where an approach by less dangerous means is not reasonably feasible, a suitable crane with a manned basket may be used. The regulation requires lifting operations to be properly planned, properly supervised, and carried out in a safe manner, and this includes the use of earthmoving machinery for lifting operations.

 

Supervisors should first carry out a risk assessment, which includes ensuring that the earthmoving machinery is suitable for the task, that there are sufficient lifting accessories available, and that ground conditions are suitable.

Excavator Boom

 Excavator Boom

 

The lifting accessories, including quick hitches, should be suitable for the load and marked with their safe working load. The risk assessment will also address the need to segregate the lifting operation from other persons on site. Based on this risk assessment, a written method statement setting out the safe operating procedure to be followed should be prepared and communicated to all personnel involved in the lifting operation.

 

Lifting accessories, including quick hooks, should be suitable for the load and marked with their safe working load. The risk assessment will also address the need to isolate the lifting operation from other personnel on-site. Based on this risk assessment, a written method statement describing the safe operating procedures to be followed should be prepared and communicated to all personnel involved in the lifting operation.

 

Special accessories for lifting (or other uses) should be compatible with the machines and connections to which they are attached (quick connects). Competent personnel should verify that the combination is designed to carry the load in this manner.

 

Before lifting operations begin, all personnel involved must be fully aware of the key findings of the risk assessment, the method statement, and their individual roles in performing the task.

 

Supervisors should ensure that personnel is kept away from the lifting area, especially if no one is working underneath the elevator, for example in a trench. Personnel should wear high visibility clothing and other appropriate PPE. excavator operators should not move the machine or load until they are satisfied that the spreader/signaller and any other personnel associated with the lift are all out of the danger area and in a safe position.

Compaction Wheel

 Compaction Wheel 

Lifting accessories

Lifting accessories, including lifting points, should be inspected by the hoist or operator prior to use to ensure they are not damaged or worn. Any defective lifting accessories should be stopped immediately.

 

Chain slings should not have any twisted links or parts, hooks should not be bent, and safety clips should be in working condition. Fiber slings should be rejected when damaged, and in any case when the outer covering is worn to the extent that the inner core is visible.

 

If the hooking device (the point on the machine designed to attach the load) is not part of the bucket, the bucket should (where possible, unless otherwise stated by the operator) be removed to improve visibility and reduce the weight being lifted. If the bucket is retained, the weight of both the bucket and the quick connector must be added to the load when determining if the load is within rated capacity.

 

Lifting Slings

When attaching a lifting sling to a hooking device or lifting point, care should be taken to ensure that the sling and excavator attachments are always free to hang. For example, if a pipe suspended from a sling is rotated end-to-end, the use of a shackle for the connection may limit rotation.

 

Ship in 48 Hours

The source is from here.


评论

发表评论

此博客中的热门博文

Which parts make up an excavator

  Excavators pass many names-- diggers, track hoes, 360s, JCBs, as well as even rubber ducks. There's quite a bit of terms of excavators, as well. We can imagine the shape of an excavator, however what are the parts of an excavator called and what features do they carry out? While excavator layout continues to progress and also boost, the standard form has continued to be regular for years. Obviously, various designs from various manufacturers will certainly have individual excavator parts and also functions not common to all kinds. By the same token, a 1 tonne mini excavator will certainly not share all functions and capacities with a 15 tonne strong device. Nonetheless, they all consist of the exact same 3 sections as well as standard elements which we will discuss below. The 3 main parts of the excavator are the undercarriage, the body and the arms. The undercarriage is the most affordable area and is responsible for transferring the excavator to the working area and also includ
阅读全文

Long-Reach Excavator Advantages and Operating Guidelines

图片
As its name suggests, the long-reach excavator   has an extended jib between the machine body and the working arm, which is powered by oil cylinder. The long arm is equipped with a set of oil cylinder operating system to provide power for the movement of the oil cylinders. All of these designs double the working range of the bucket, which can go higher, deeper and further. The great improvements make the long-arm excavator an especial digging tool for minerals, docks, storage and emergency rescue, which has great practical value.    Long Reach Arm and Boom To be specific, the long-arm digger has the following advantages:   1. Wider Applications   The long arm can work in the tough and extreme working environment where other excavators can ’ t reach. This unique advantage makes it reliable enough to handle various constructions.   2. Higher Standard   Strict technology and examination standards have been set to manufacture this machine, which guarantees its excellent construction perfor
阅读全文

What Is an Excavator Boom?

  An excavator boom is a component made use of to operate an excavator, an item of heavy machinery utilized for excavating holes or otherwise moving huge quantities of product. The boom is the tilted arm that is affixed to the excavator itself as well as the arm is pinned to the boom. The arm is sometimes called the dipper or stick. A knuckle boom can relocate right or left according to the machine, unlike conventional booms which can just go up or down.The excavator typically consists of a base with tracks or treads attached to turning wheels, along with a system known as the house that turns 360 degrees so the operator can access product on all sides of the device without rearranging the entire system. The excavator boom prolongs off the front of your house, and it normally contains two items that articulate for better reach. A pail is mounted throughout of the excavator boom. This container is in charge of doing the digging in addition to for consisting of the materials to be reloca
阅读全文